When adding a port forward rule of
Destination Protocol is TCP/UDP
and
Destination Port is: 5060 (or anything)
New Destination IP: 192.168.1.2 (PBX System)
It doesn't open the port for me, i've tried numerous ports and none of them forward to the DC or any workstation forwards. I really think it is a problem with my rules and the WAN/LAN on the untangle but im stuck.
Network Config
Cable Modem (Bridged) --> Untangle NIC 1
Untangle Router DHCP OFF on NIC 2 (192.168.1.254) --> Switch
Switch --> Domain Controller (192.168.1.1)
everything is swimming except port forwarding, i swear i've got to be doing something wrong and it's 2:30 am and people come to work in 4 hours im going to die in a fire please help me someone. if anyone feels up for a phone call too PM me, it shouldn't take long if you know whats going on.
I'll send you doughnuts i swear.
Destination Protocol is TCP/UDP
and
Destination Port is: 5060 (or anything)
New Destination IP: 192.168.1.2 (PBX System)
It doesn't open the port for me, i've tried numerous ports and none of them forward to the DC or any workstation forwards. I really think it is a problem with my rules and the WAN/LAN on the untangle but im stuck.
Network Config
Cable Modem (Bridged) --> Untangle NIC 1
Untangle Router DHCP OFF on NIC 2 (192.168.1.254) --> Switch
Switch --> Domain Controller (192.168.1.1)
everything is swimming except port forwarding, i swear i've got to be doing something wrong and it's 2:30 am and people come to work in 4 hours im going to die in a fire please help me someone. if anyone feels up for a phone call too PM me, it shouldn't take long if you know whats going on.
I'll send you doughnuts i swear.