Hi all,
Ran a new install OVA from WebFool's link in other post yesterday afternoon. here are the specs of the physical server I am trying to run on:
ML370 G5
dual E5335
1TB raid 5 on P400/512
32GB RAM
2 other VM, data, email
I did follow the guide UT or WebFool created on the wiki and ensured time date are correct.
the VM is stock but went from 2GB ram to 3GB, just for more wiggle room. we have about 10 clients, from tablets, DVR, phones, 2 desktops, one laptop. Just a home network with static IP. our current dn/up speeds are fine all the time with 85/15 avg speed test. there is no warning but one thing, its always happening from 2-7 in the morning every time i reinstall UT. i started with V9 and just last night tried V10, about the same time. I did install all around that time period, just 12 hrs prior. if i leave the server running without start UT it runs for a few days then i try and fire up UT, and about 12 hrs later, LAN2 light blinks rapidly (UT-LAN) to internal clients, LAN1 Light is off no activity (shared lan for all other VM), solo rtl8169 as EXT connection from modem. 3 separate VSwitches. i dont think i created a storm?
Ran a new install OVA from WebFool's link in other post yesterday afternoon. here are the specs of the physical server I am trying to run on:
ML370 G5
dual E5335
1TB raid 5 on P400/512
32GB RAM
2 other VM, data, email
I did follow the guide UT or WebFool created on the wiki and ensured time date are correct.
the VM is stock but went from 2GB ram to 3GB, just for more wiggle room. we have about 10 clients, from tablets, DVR, phones, 2 desktops, one laptop. Just a home network with static IP. our current dn/up speeds are fine all the time with 85/15 avg speed test. there is no warning but one thing, its always happening from 2-7 in the morning every time i reinstall UT. i started with V9 and just last night tried V10, about the same time. I did install all around that time period, just 12 hrs prior. if i leave the server running without start UT it runs for a few days then i try and fire up UT, and about 12 hrs later, LAN2 light blinks rapidly (UT-LAN) to internal clients, LAN1 Light is off no activity (shared lan for all other VM), solo rtl8169 as EXT connection from modem. 3 separate VSwitches. i dont think i created a storm?